Basic example raw af inet udp server and client ================================================= .. tab-set:: .. tab-item:: IPv4 RAW_AF_INET UDP * In this program, you are going to learn .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow * How to create a Socket ? .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow * How to send a data ? .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow * How to recv a data ? .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow * How to use socket APIs ? * `socket `_ * `sendto `_ * `recvfrom `_ .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Topics in this section, * :ref:`program 1: udp single server and single client : single data transfer ` * :ref:`program 2: udp single server and single client : multiple data transfer ` .. _ipv4_raw_af_inet_udp_single_data_transfer: .. tab-set:: .. tab-item:: program 1 : udp single server and single client : single data transfer .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Topics in this section, * :ref:`IPV4 RAW_AF_INET UDP SOCKET FAQs ` * :ref:`Program1 : Step 1: Sequence Diagram for SERVER.c ` * :ref:`Program1 : Step 2: Program for Server.c ` * :ref:`Program1 : Step 3: Compile and Execute Server.c ` * :ref:`Program1 : Step 4: Sequence Diagram for CLIENT.c ` * :ref:`Program1 : Step 5: Program for Client.c ` * :ref:`Program1 : Step 6: Compile and Execute Client.c ` * :ref:`Summary ` .. _ipv4_raw_af_inet_udp_multiple_data_transfer: .. tab-set:: .. tab-item:: program 2 : udp single server and single client : multiple data transfer .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Topics in this section, * :ref:`IPV4 RAW_AF_INET UDP SOCKET FAQs ` * :ref:`Program2 : Step 1: Sequence Diagram for SERVER.c ` * :ref:`Program2 : Step 2: Program for Server.c ` * :ref:`Program2 : Step 3: Compile and Execute Server.c ` * :ref:`Program2 : Step 4: Sequence Diagram for CLIENT.c ` * :ref:`Program2 : Step 5: Program for Client.c ` * :ref:`Program2 : Step 6: Compile and Execute Client.c ` * :ref:`Summary ` .. _basic_example_ipv4_raw_af_inet_udp_socket: .. tab-set:: .. tab-item:: IPV4 RAW_AF_INET UDP SOCKET : FAQs .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Let us answer few basic questions in this socket .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow What does ``socket(AF_INET, SOCK_RAW, IPPROTO_UDP)`` do? .. dropdown:: See Answer This call creates a raw socket in the ``AF_INET`` address family for direct access to UDP packets. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow When would I use ``SOCK_RAW`` sockets with ``IPPROTO_UDP``? .. dropdown:: See Answer This combination is used for tasks like packet sniffing, crafting custom protocols, or low-level UDP packet manipulation. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Can ``SOCK_RAW`` sockets be used for regular UDP communication? .. dropdown:: See Answer While technically possible, it's not recommended. Higher-level APIs are more suitable for standard UDP communication. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow What is the difference between ``IPPROTO_UDP`` and ``SOCK_RAW`` for UDP communication? .. dropdown:: See Answer ``IPPROTO_UDP`` specifies the transport protocol (UDP), while SOCK_RAW indicates a raw socket, providing more control over UDP packet content. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow What are common issues when working with raw UDP sockets? .. dropdown:: See Answer Common issues include permission errors, endianness mismatches, and improper packet handling. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow How do I handle errors when using raw UDP sockets? .. dropdown:: See Answer Use error codes returned by system calls like socket and sendto for error handling. Log and handle errors gracefully. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Can raw UDP sockets be used for both sending and receiving data? .. dropdown:: See Answer Yes, raw UDP sockets can be used for both sending and receiving UDP packets. .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow Why is it important to check the return value of sendto() and recvfrom() in socket programming? .. dropdown:: See Answer It detects issues such as network errors or closed connections. .. _program1_ipv4_raw_af_inet_udp_socket_server_sequence_diagram: .. tab-set:: .. tab-item:: Program1 : Step 1: Sequence Diagram for SERVER.c .. plantuml:: @startuml !theme spacelab start :socket(AF_INET, SOCK_RAW, IPPROTO_UDP); :recvfrom(sock_fd, recvbuffer,(sizeof(struct iphdr) + sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, &length); :(void)close(sock_fd); stop @enduml .. _program1_ipv4_raw_af_inet_udp_socket_server_code: .. tab-set:: .. tab-item:: Program1: step 2: program for server.c * There are many functions used in socket. We can classify those functions based on functionalities. * Create Socket * Recvfrom data_packet * Close socket * ``socket()`` is used to create a new socket. For example, .. code-block:: c sock_fd = socket(AF_INET, SOCK_RAW, IPPROTO_UDP); * ``recvfrom`` is commonly used with sockets, where communication is connectionless. it provides information about the source (sender) of the data, including the sender's IP address and port number. For example, .. code-block:: c ret = recvfrom(sock_fd, recvbuffer,(sizeof(struct iphdr) + sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, &length); * ``close`` is used to close the socket To free up system resources associated with the socket. For example, .. code-block:: c (void)close(sock_fd); * See the full program below, .. literalinclude:: single_data_transfer/server/server.c :language: c :emphasize-lines: 109, 110, 111, 188, 189, 190, 191, 192, 193, 217 .. _program1_ipv4_raw_af_inet_udp_socket_server_side_compile_and_execute: .. tab-set:: .. tab-item:: Program1 : Step 3: Compile and Execute Server.c .. code-block:: c :emphasize-lines: 1, 3 $ gcc -o server server.c $ sudo ./server 127.0.0.1 IP Address: 127.0.0.1 checksum is 53fc Received :Hello server .. _program1_ipv4_raw_af_inet_udp_socket_client_sequence_diagram: .. tab-set:: .. tab-item:: Program1 : Step 4: Sequence Diagram for CLIENT.c .. plantuml:: @startuml !theme spacelab start :socket(AF_INET, SOCK_RAW, IPPROTO_UDP); :sendto(sockfd, buffer, (sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, sizeof(struct sockaddr_in)); :(void)close(sockfd); stop @enduml .. _program1_ipv4_raw_af_inet_udp_socket_client_code: .. tab-set:: .. tab-item:: Program1 : step 5: program for client.c * There are many functions used in socket. We can classify those functions based on functionalities. * Create Socket * Sendto data_packet * Close socket * ``socket`` is used to create a new socket. For example, .. code-block:: c sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_UDP); * ``sendto`` is used to send the encoded message to the specified server address and port using a socket. For example, .. code-block:: c ret = sendto(sockfd, buffer, (sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, sizeof(struct sockaddr_in)); * ``close`` is used to close the socket To free up system resources associated with the socket. For example, .. code-block:: c (void)close(sockfd); * See the full program below, .. literalinclude:: single_data_transfer/client/client.c :language: c :emphasize-lines: 109, 110, 111, 185, 186, 187, 188, 189, 200 .. _program1_ipv4_raw_af_inet_udp_socket_client_side_compile_and_execute: .. tab-set:: .. tab-item:: Program1 : Step 6: Compile and Execute Client.c .. code-block:: c :emphasize-lines: 1, 3 $ gcc -o client client.c $ sudo ./client 127.0.0.1 IP Address: 127.0.0.1 checksum is 4bec sent message .. _program2_ipv4_raw_af_inet_udp_socket_server_sequence_diagram: .. tab-set:: .. tab-item:: Program2 : Step 1: Sequence Diagram for SERVER.c .. plantuml:: @startuml !theme spacelab start :socket(AF_INET, SOCK_RAW, IPPROTO_UDP); :i = 0; while (while (i < NUM_MESSAGES)) is (yes) :recvfrom(sock_fd, recvbuffer,(sizeof(struct iphdr) + sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, &length); :++i; endwhile :(void)close(sock_fd); stop @enduml .. _program2_ipv4_raw_af_inet_udp_socket_server_code: .. tab-set:: .. tab-item:: Program2 : step 2: program for server.c * There are many functions used in socket. We can classify those functions based on functionalities. * Create Socket * Recvfrom data_packet * Close socket * ``socket()`` is used to create a new socket. For example, .. code-block:: c sock_fd = socket(AF_INET, SOCK_RAW, IPPROTO_UDP); * ``recvfrom`` is commonly used with sockets, where communication is connectionless. it provides information about the source (sender) of the data, including the sender's IP address and port number. For example, .. code-block:: c ret = recvfrom(sock_fd, recvbuffer,(sizeof(struct iphdr) + sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, &length); * ``close`` is used to close the socket To free up system resources associated with the socket. For example, .. code-block:: c (void)close(sock_fd); * See the full program below, .. literalinclude:: multiple_data_transfer/server/server.c :language: c :emphasize-lines: 111, 112, 113, 192, 193, 194, 195, 196, 197, 222 .. _program2_ipv4_raw_af_inet_udp_socket_server_side_compile_and_execute: .. tab-set:: .. tab-item:: Program2 : Step 3: Compile and Execute Server.c .. code-block:: c :emphasize-lines: 1, 3 $ gcc -o server server.c $ sudo ./server 127.0.0.1 IP Address: 127.0.0.1 checksum is 53fc Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server Received :Hello server .. _program2_ipv4_raw_af_inet_udp_socket_client_sequence_diagram: .. tab-set:: .. tab-item:: Program2 : Step 4: Sequence Diagram for CLIENT.c .. plantuml:: @startuml !theme spacelab start :socket(AF_INET, SOCK_RAW, IPPROTO_UDP); :i = 0; while (while (i < NUM_MESSAGES)) is (yes) :sendto(sockfd, buffer, (sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, sizeof(struct sockaddr_in)); :++i; endwhile :(void)close(sockfd); stop @enduml .. _program2_ipv4_raw_af_inet_udp_socket_client_code: .. tab-set:: .. tab-item:: Program2 : step 5: program for client.c * There are many functions used in socket. We can classify those functions based on functionalities. * Create Socket * Sendto data_packet * Close socket * ``socket`` is used to create a new socket. For example, .. code-block:: c sockfd = socket(AF_INET, SOCK_RAW, IPPROTO_UDP); * ``sendto`` is used to send the encoded message to the specified server address and port using a socket. For example, .. code-block:: c ret = sendto(sockfd, buffer, (sizeof(struct udphdr)+ strlen(string_data)+1), 0, (struct sockaddr*)clientaddr, sizeof(struct sockaddr_in)); * ``close`` is used to close the socket To free up system resources associated with the socket. For example, .. code-block:: c (void)close(sockfd); * See the full program below, .. literalinclude:: multiple_data_transfer/client/client.c :language: c :emphasize-lines: 110, 111, 112, 188, 189, 190, 191, 192, 206 .. _program2_ipv4_raw_af_inet_udp_socket_client_side_compile_and_execute: .. tab-set:: .. tab-item:: Program2 : Step 6: Compile and Execute Client.c .. code-block:: c :emphasize-lines: 1, 3 $ gcc -o client client.c $ sudo ./client 127.0.0.1 IP Address: 127.0.0.1 checksum is 4bec SentMessage SentMessage SentMessage SentMessage SentMessage SentMessage SentMessage SentMessage SentMessage SentMessage .. tab-set:: .. tab-item:: Enhanced Socket Flexibility with ``AF_INET`` and ``PF_INET`` Domains .. panels:: :container: container pb-4 :column: col-lg-12 p-2 :card: shadow **Default Domain:** By default, the socket is configured to work in the ``AF_INET`` domain, handling all types of network data. **Additional Domain Support:** We expand the socket's capabilities to also function in the ``PF_INET`` domain, allowing it to operate similarly to ``AF_INET``. **Socket Creation:** We set up a network connection point known as a socket using ``socket(PF_INET, SOCK_RAW, IPPROTO_UDP)``. **Working Scenario:** Despite the change in domain to ``PF_INET``, the socket continues to operate the same way, handling general network data. .. _basic_example_ipv4_raw_af_inet_udp_summary: .. tab-set:: .. tab-item:: Summary ============== ================================================================================================================== Socket API Learning ============== ================================================================================================================== socket Create a new socket recvfrom It provides information about the source (sender) of the data, including the sender's IP address and port number. sendto Send the encoded message to the specified server address and port using a socket. ============== ================================================================================================================== .. card:: See Also * Previous topic * :doc:`../../../sockets/ipv4_raw_af_inet_tcp/epoll/epoll` * Current topic * :doc:`../../../sockets/ipv4_raw_af_inet_udp/Basic_example/Basic_example` * Next topic * :doc:`../../../sockets/ipv4_raw_af_inet_udp/select/select` * Other sockets * :doc:`../../../sockets/ipv6_af_inet6_tcp` * :doc:`../../../sockets/ipv6_af_inet6_udp` * :doc:`../../../sockets/ipv6_raw_af_inet6_icmp` * :doc:`../../../sockets/ipv6_raw_af_inet6_tcp` * :doc:`../../../sockets/ipv6_raw_af_inet6_udp` * :doc:`../../../sockets/ipv6_raw_af_inet6_raw` * :doc:`../../../sockets/raw_af_packet_raw_htons_ETH_P_ALL` * :doc:`../../../sockets/raw_af_packet_tcp_htons_ETH_P_ALL` * :doc:`../../../sockets/raw_af_packet_udp_htons_ETH_P_ALL` * Other IPCs * :doc:`../../../Message_queues/Message_queues` * :doc:`../../../NamedPipes/NamedPipes` * :doc:`../../../Netlink/Netlink` * :doc:`../../../Shared_Memory/Shared_Memory` * :doc:`../../../Shared_Memory_2_FDS/Shared_Memory_2_FDS` * :doc:`../../../SocketPair/SocketPair` * :doc:`../../../Timerfd/Timerfd`