Step 4 : Flash SD Card
======================

.. tab-set::

   .. tab-item:: Flash SD Card

        * In this program, you are going to learn


        .. panels::
                :container: container pb-4
                :column: col-lg-12 p-2
                :card: shadow

                * How to ?


.. panels::
        :container: container pb-4
        :column: col-lg-12 p-2
        :card: shadow

        Topics in this section,

                * :ref:`Flash image to SD Card <barelinux_rpi_4bstep6_0>`


.. _barelinux_rpi_4bstep6_0:

.. tab-set::

   .. tab-item:: Flash image to SD Card

        * Download balena etcher application to flash image to SD card. 

                * `balena etcher download <https://etcher.balena.io/#download-etcher>`_

        
        * Follow the below steps to flash image to SD card.

        .. code-block:: c

                $ ./balenaEtcher-1.18.11-x64.AppImage


        
        * balena etcher application pops up once the above command is executed.

        .. image:: img1.png
                :alt: Diagram
                :width: 500
                :height: 300



        * select the image file which needs to be flashed to the SD card.

        .. image:: img2.png
                :alt: Diagram
                :width: 1800
                :height: 200



        * once the image is selected click flash.

        .. image:: img3.png
                :alt: Diagram
                :width: 500
                :height: 300


        .. image:: img4.png
                :alt: Diagram
                :width: 500
                :height: 300


        .. image:: img5.png
                :alt: Diagram
                :width: 500
                :height: 300
                


        * Now the bare-linux target image is flashed to the SD card using balena etcher.