Step 5 : Flash the image to SD card
=====================================

.. tab-set::

   .. tab-item:: Flash SD Card

        * In this program, you are going to learn


        .. panels::
                :container: container pb-4
                :column: col-lg-12 p-2
                :card: shadow

                * How to ?


.. panels::
        :container: container pb-4
        :column: col-lg-12 p-2
        :card: shadow

        Topics in this section,

                * :ref:`Flash image to SD Card <openwrt_rpi_3b_step5_0>`


.. _openwrt_rpi_3b_step5_0:

.. tab-set::

   .. tab-item:: Flash image to SD Card

        * Download balena etcher application to flash image to SD card.

                * `balena etcher download <https://etcher.balena.io/#download-etcher>`_


        * Follow the below steps to flash image to SD card.

        .. code-block:: c

                $ ./balenaEtcher-1.18.11-x64.AppImage



        * balena etcher application pops up once the above command is executed.

        .. image:: pic1.png
                :alt: Diagram
                :width: 500
                :height: 300



        * select the image file which needs to be flashed to the SD card.

        .. image:: pic2.png
                :alt: Diagram
                :width: 1800
                :height: 200



        * once the image is selected click flash.

        .. image:: pic3.png
                :alt: Diagram
                :width: 500
                :height: 300


        .. image:: pic4.png
                :alt: Diagram
                :width: 500
                :height: 300


        .. image:: pic5.png
                :alt: Diagram
                :width: 500
                :height: 300



        * Now the openwrt target image is flashed to the SD card using balena etcher.